![\"\"](\"https:\/\/boom-tracker.com\/tracker\/wp-content\/uploads\/2020\/06\/Wavefront-1024x791.png\")
<\/figure>\n\n\n\nSo \u0398=arcsin(v*t\/d)<\/em> and that gives us a rough<\/em> direction to the source of the sound. The distance d <\/em>can be measured with a measuring tape. The time difference t <\/em>can be measured by a computer, and the velocity of sound can be calculated if we know the air temperature.<\/a> Let’s assume some values to see it in action:<\/p>\n\n\n\n d = 20 meters (approximately 65 ft for those playing in the US)<\/p>\n\n\n\n v = 343.3 meters\/second or 1126 feet\/second (at 20\u00b0C \/ 77\u00b0F )<\/em><\/p>\n\n\n\n t = 1 millisecond = 0.001 seconds<\/p>\n\n\n\n So \u0398 = arcsin(343.3*0.001\/20) = 0.01717 radians which is just a little less than 1 degree of arc.<\/p>\n\n\n\n Since the microphones are set on an east-west line, that means that the direction to the source of the sound is 1 degree west of north, or 359\u00b0.<\/p>\n\n\n\n Clever people will notice that I’ve glossed over a critical detail. I’ve assumed that the wave is propagating from the top of the page, rather than from the bottom. If it were <\/strong>propagating from the bottom, then the timing would be the same, but the bearing to the sound would be 1 degree west of south, or 181\u00b0<\/em>. How do we figure out which of those is correct?<\/p>\n\n\n\n The answer is using more than 2 microphones. Let’s assume we had 4 microphones arranged in a square like so:<\/p>\n\n\n\n The time between the arrival at Mic1 and Mic3 is here represented as t’<\/em>, and and distance is represented by d’<\/em>. Using similar logic to that above, if t’ = 58.2 milliseconds<\/em>, and the distance is the same, then the bearing from these two mics is either 358\u00b0 (if coming from the upper left)<\/em> or 2\u00b0 (if coming from the upper right)<\/em>. Since 358\u00b0 and 359\u00b0 are about the same, we can deduce the correct answer. Actually, with 4 microphones we have a total of 6 baselines to calculate with.<\/p>\n\n\n\n There’s only one problem left with this: It’s based on a false assumption that the sound wave is straight line, but it’s not. It’s an expanding circle (or actually sphere). Still this is a useful approximation, and will get it close enough to do a more subtle analysis. More on that next time<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":" The basic idea behind this project is to use an array of microphones to measure the relative time of a sound. Then, using the locations and arrangement of the microphones, we should be able to calculate where the sound originated. Here’s how this will work. Let’s assume we have two microphones on an east-west line… Continue reading Theory<\/span> ![\"sound](\"https:\/\/boom-tracker.com\/tracker\/wp-content\/uploads\/2020\/06\/FullArray3-791x1024.png\")